Home / News / Company News / Shower installation method.

Shower installation method.

The installation height of the shower can be divided into two types according to the type of shower:
Ming installed lifting rod shower is generally defined by the water surface of the shower, its distance is 2 meters.
It should be noted that these data are only average data, the actual installation of the shower should be adjusted according to the height of the user.
Open shower switch buried water pipe is left hot and right cold, the center spacing should be 150mm, the wall buried water outlet should be flat with the tile surface, and the internal buried water pipe should be perpendicular to the wall, after the installation of the shower should be 90 degrees Angle with the wall.
In addition, the water pressure regulation is also key: under normal circumstances, the water pressure within 1.5 kg is suitable for the use of the shower. Too much water pressure will cause the shower to burst, and too much water pressure can not be used normally.